I do get many questions from Subscribers to the Newsletter about UGL’s, such as what is a UGL?, what is the difference between UGL and PHARMA?, which do i recommend?, which does the best Primo?, which lab is the cleanest?, etc etc etc.. So i have put together a Question and Answer session for those of you that are new to the world of the Underground Lab.

What is a UGL?
UGL is short for Underground Lab. Underground labs will be involved in the manufacturing of Anabolic Steroids. Some UGL’s are huge outfits that are professional in there approach to the whole process, eg Environment, Sterility, Filtering, Packaging, whilst other small UGL’s take the whole process much less serious and could be manufacturing Anabolic Steroids in the garden shed at the bottom of the garden!

What is the main difference between PHARMA grade and UGL?
There are many stringent requirements that a Pharma Laboratory will need to undertake when manufacturing Anabolic Steroids. These requirements ensure the user of the compound remains safe. UGL’s do not have to pass the same requirements and thus a product can reach the User that is both Dirty and Dangerous.

How can i tell what is a good UGL and a bad UGL?
This can be a difficult process, because what could be a good UGL today, may turn into a bad UGL tomorrow. A bad UGL could be bad for lots of reasons. Perhaps its a clean UGL which carries out all the procedures needed to give you a sterile product BUT under-doses the product. Perhaps its a dirty UGL that gives you accurately dosaged products but Sterility is the issue.
A good UGL, will have lab results backing up the label claim and will be more than happy to let you know the actions it is taking to give you a sterile product.
You may remember when i contacted a lab owner whom mostly sells on FACEBOOK, (via secret groups and resellers) after a friend of mine was injured using his product. I asked about filtration procedures and contaminant removal.. The guy didn’t even remove contaminants and his filtration procedure was not removing small bacteria.. I was horrified.

What are your UGL lab preferences?
I have been using various labs over the years, but over the last 6months i keep returning to my 5 favourite labs being Keifei, Malay Tiger, Dunning Labs, Dimension Labs and Sphinx.
Consistency for me is key, and these guys seem to be reliable.

What are the dangers using a bad UGL?
DEATH!!! I am not kidding around here guys, you could Die, using a UGL that skips the important steps to ensure a sterile product. At best, you could just become ill, sent to hospital, a course of antibiotics given, and recovery within a week.
I have seen some terrible injury’s through guys using dirty oils, which you can find yourself, go onto Goggle images and type in Steroid Abscess and be disgusted at the injury’s that these UGL’s are giving to our community.
If you are a small UGL yourself reading this topic, i ask you now.. PLEASE DO NOT cut corners, Remove the metals.. keep the filtration slow filtering the small bacterias, and make sure your Environment and Closures are sterile, because if you do kill someone, they will track the lab manufacturer down, and you will go to jail. Something to seriously think about…

Can you tell me what good UGL’s should be doing to ensure a clean sterile product?
Manufacturing in an environment that is sterile, using Raw Powders that are as pure as possible, using Solvents and Carrier Oils that are USP grade only, and Sterile Vials/Stoppers/Caps, Removal of Contaminants, Small Bacteria Filtration.
As mentioned before, it is your life you are playing with. A good UGL will be more than happy, proud in-fact, to talk with you about the actions they personally take to give you a product you can be pleased with.

As always, you can contact me with your questions, lab info, reviews etc at marcus.rally@mail.com